2,393 total views
ABJZ40C Mixer Pump & ABM-4SE Block Machine are being loaded and ready to be shipped to Ghana. This time the customer also purchased a concrete mixer pump and brick machine equipment to build a ground floor building. The mixer pump can directly mix the concrete and transport it to the corresponding floor, and the bricks used in the construction of the building can be directly manufactured by the ABM-4S block making machine.
Main Operation Button And Instrument Introduction of ABJZ40C:
Pump: After pressing the button, the diesel engine automatically accelerates to the rated speed, and then starts pumping. Press down
Press the button again to stop pumping, and the motor decelerates to an idle state.
Reverse pump: When the pump is working, press the reverse pump button to enter the reverse pump working state and release button, it will immediately return to normal pumping state;
Mixing: Press the button, drum mixer is stirring mode, and mixing stops when push again.
ABM-4SE Block Machine Loading Process video:
ABM-4SE concrete block machine is mainly used to manufacture concrete bricks through the process of mixing, mixing, and forming cement, sand, stone, slag and other raw materials.
Main technical parameters of ABM-4SE concrete block machine
|Shaping cycle||24-30 seconds|
|Pallet size||850×550×25mm (bamboo)|
|Vibration frequency||4000 R/Min|
|Hoist machine power||22KW|
|Electricity||As client require|
Optional section Accessories of ABM-4SE:
|Stacker||It is used for stacker the green blocks one layer by one layer.|
|Extra common block mould||Hollow or solid|
|Extra paver mould||paver or curbstone|